In a surprise and brazen move, Israel has conducted a number of air raids on Syria’s Ministry of Defense headquarters and buildings in the vicinity of the presidential palace in Damascus. This is a serious escalation of the conflict between Israel and Syria and an indication of growing Israeli anxiety at the ascendancy of an Islamist-led government under President Ahmed al-Sharaa.
The strikes were reported to have come late Tuesday night, and eyewitnesses in Damascus painted pictures of massive explosions, smoke plumes, and sound of air defense batteries firing in the capital. The Israeli strikes appeared to be deliberately aimed at key strategic military and government facilities, such as the very heavily fortified Defense Ministry compound a clear message to Syria’s new regime and their Middle Eastern allies.
This is not the initial time Israel has attacked militarily near the Syrian presidential palace. In May 2025, Israeli troops conducted a targeted attack on a military center only a few kilometers from the palace. Then, Israeli intelligence sources framed the action as a “warning shot” against what they described as the consolidation of a jihadist state led by al-Sharaa, whose roots were in Hay’at Tahrir al-Sham (HTS), previously an al-Qaeda franchise.
Israel long worried about Iran’s entrenchment in Syria, but the rise to power in Damascus of HTS-supported troops presents a new and explosive threat. Al-Sharaa, who seized power following Bashar al-Assad’s December 2024 collapse, has attempted to project himself as an inclusive leader. But his past as a militant leader and Islamist domination of his government isolated Syria diplomatically and now militarily under attack.
One major reason cited by Israel for the latest assault is protecting Syria’s Druze minority. Sectarian tensions in southern Syria and Suwayda Province in particular have spilled over into clashes at arms between Druze groups and HTS-affiliated local militias over the past few weeks. Dozens have been reported killed, with the Druze accusing the new government of violating autonomy agreements and sending extremist fighters to impose allegiance.
Israeli leaders, while not officially acknowledging the Tuesday airstrikes, had previously signaled that they were prepared to act in Druze communities’ interests. As recently as June 2025, Prime Minister Benjamin Netanyahu reminded that Israel’s “historic and moral responsibility” is protecting Druze communities on both sides of the border.
Though Israel rarely admits to acts in Syria, military analysts see the bombings as being about more than charity. The ideological direction of the new Syrian state Islamist, anti-Western, and rooted in jihadist extremism represents a strategic threat to Israel and to its allies. Intelligence sources also state that HTS troops have been rearming along the Israeli-occupied Golan Heights, raising alarms about a revived insurgency or cross-border provocations.
The timing of the strikes also speaks of realignment in the region. With Iran stretched too thin in Iraq and Lebanon, and Russia busy with its internal affairs and declining presence in Syria after Assad, Israel appears to be seizing a moment to shape the direction of Syria’s transition.
The international reaction is muted but cautious. The United States is yet to comment on the airstrike, though Washington has refused to recognize al-Sharaa’s rule and continues to classify HTS as a foreign terrorist organization. European powers, already spooked by the refugee influx and potential return of the jihadists to the Levant, are watching closely.
Turkey which assisted in spearheading al-Sharaa’s rise to power by backing HTS against Assad finds itself in an awkward situation. On the one hand, Ankara shares Israel’s concerns about instability and extremism; on the other, it cannot easily abandon the regime it helped install. Recent intelligence suggests that Turkey is already wavering in its support, with sources saying that it told al-Sharaa to vacate the presidential palace last month.
These latest Israeli air attacks represent an escalated step not just in military tensions, but in Israel’s appetite to dictate Syria’s post-Assad fate by force. Whether or not this is the beginning of an extended Israeli campaign against the Islamist-led government remains to be seen. But the message is unequivocal: Israel will not tolerate a radical regime that is at odds with its interests as a border neighbor.
For ordinary Syrians, and especially those living in Damascus, the airstrikes are a ghostly reminder that war may not be over even after Assad’s downfall. The specter of new foreign intervention, sectarian fighting, and militia warfare now looms over what was supposed to be a new beginning for the country.
As Syria spirals deeper into darkness, something is certain: the battle over its destiny is a long way from being won, and the stakes are now being staked not just in political backrooms but in the skies above Damascus.
Israel Launches Major Airstrikes in Damascus: Targeting Syria’s Defense Ministry and Islamist-Led Government
CreatBot D600 Pro 2 is a cutting-edge industrial 3D printer designed for businesses demanding accuracy, reliability, and flexibility in 3D printing. As part of the D600 series, it incorporates a large build volume, advanced dual extrusion technology, and high-performance features suitable for industrial-scale applications and varied materials.
CreatBot D600 Series Overview
The CreatBot D600 Series and D600 Pro establish benchmarks for large-scale 3D printers solutions. With a printing area of 600 ? 600 ? 600 mm, these industrial 3D printers cater to a broad spectrum of industrial 3D printing demands, from big model prototyping to end-use production. The D600 Pro lineup and the latest D600 Pro 2 introduce further enhancements in performance and material compatibility.
Key Features and Advantages
Industrial-Grade Large Build Volume
Build size: 600 ? 600 ? 600 mm
Ideal for large format 3D printing projects and industrial 3D printing
Supports engineering-grade materials and intricate models
Dual Extrusion and High-Heat Printing
4th generation 1.75mm dual extruders and hotends for multi-material printing
Right and left-side extruder design for flexible printing process
Supports high performance 3D materials, including PLA filament, nylon, carbon-fiber, and more
Maximum nozzle temperature: up to 420°C (high temperature)
Heated build chamber for high-performance applications
Precision, Speed and Reliability
Professional 3D print quality with accurate layer resolution
Advanced motion system for fast printing and robust performance
Consistent printing speed up to 120 mm/s
Reliable operation for continuous industrial use
Supported Materials and Filaments
Wide Filament Compatibility
Works with a broad spectrum of filament: PLA, ABS, PC, PETG, PVA, nylon filament, carbon-fiber, and more
Designed for technical materials and functional prototyping
Advanced dual extrusion system enables multi-material and soluble support printing
Uses: Prototyping & Manufacturing
The CreatBot D600 Pro 2 and D600 Pro serve a diverse set of applications:
Rapid prototyping and large format 3D print models
Functional parts for automotive, aerospace, and engineering
Tooling, jigs, and fixtures for industrial production
Art, architecture, and creative projects requiring large industrial 3D printing
Specs
Model: CreatBot D600 Pro 2, D600 Pro, D600
Build volume: 600 ? 600 ? 600 mm
Extruders: Dual extruder, 4th generation 1.75mm dual extruders and hotends
Maximum extruder temperature: 420°C
Bed temperature: up to 100°C
Filament size: 1.75 mm
Layer resolution: 0.05 – 0.3 mm
Supported materials: PLA, ABS, PC, PETG, PVA, nylon, carbon fiber, engineering-grade materials
Printing speed: up to 120 mm/s
Chamber: Heated, for improved material properties
Control: Touchscreen interface
Supported file types: STL, OBJ, AMF
Comparing D600 Models
Key Differences
D600: Entry-level industrial large scale 3d printer for basic applications
D600 Pro model: Enhanced with heated chamber, auto bed leveling, and wider material support
D600 Pro 2 model (pro version): Adds higher print speed, improved reliability, and HS (high speed) configuration
Additional CreatBot Printers
CreatBot D1000 HS for even larger build volumes
CreatBot 3D printer includes industrial and professional 3d printer solutions
FAQ
Compatible Materials for CreatBot D600 Pro 2
The D600 Pro 2 is compatible with a wide range of filament including PLA, ABS, PETG, PC, nylon filament, carbon-fiber, and other engineering-grade materials.
What is the maximum build volume of the D600 Pro 2?
The printing volume is 600 ? 600 ? 600 mm, supporting large-scale and industrial 3d printing needs.
Does the D600 Pro 2 support dual extruder and high-temperature printing?
Yes, it is equipped with dual extrusion technology and reaches up to 420°C for high-temperature printing process.
Differences Between D600 Pro 2 and D600 Pro
The D600 Pro 2 offers higher printing speed, improved reliability, and the new HS (high speed) option.
Summary
The CreatBot D600 Pro 2 and the CreatBot D600 Pro industrial professional set the benchmark in the industrial large scale 3d printer category. With exceptional build volume, robust dual extrusion system, compatibility with engineering-grade materials, and top performance across applications, they empower businesses and engineers to achieve new heights in industrial 3d printing.
nylon
pla
high temperature
d1000
I have been browsing online greater than 3 hourrs as of late, yet I
never found any interesting article like yours.
It iis pretty value sufficient for me. In my opinion, iff all website owners and bloggers made just right content as
you probably did, the internet shall bee much more helpful than ever before.
Lookk into my site; https://www.fapjunk.com
Ϝⲟr latet news you haѵe to go to seе wrld wiude web
and on web I found tһiѕ web paցe as a moѕt excellent web site for
moѕt up-to-ⅾate updates.
Herre іs my site; https://www.letmejerk.com
Wow that waѕ strange. I jսst wrote ann incredibly long
cօmment but aftеr Ι clicked submit myy cⲟmment
ɗidn’t аppear. Grrrr… ᴡell I’m not writing all that ovеr again. RegarԀless, just wanted to
ѕay wonderful blog!
Feel free tо vvisit my weeb site https://www.letmejerk.com
Ι ggot tһis web page from my buddy ԝһо informed mee cⲟncerning tһis web paɡe andd at thе moment this time I am visiting thіs web site аnd reading ѵery informative articles
ߋr reviees at thіs place.
Allso visit my blog … omegle alternative